No products in the basket.
Description:
- Dual-signal wires version, signal break-point continuous transmission.
- If one pixel is damaged, it will not affect the other LEDs working.
- Individually addressable.
- You can control each LED individually and set them to any colour or animation.
- Wide compatibility. It is well compatible with Arduino, Adafruit NeoPixel Library, FastLED library and Raspberry Pi, etc.
- 4pin JST connectors included.
A nice example of a ceiling application, where the customer has used T-1000 controller
https://makers-hut.com/testing/lib/ws2813_example.mov
Specifications:
Input voltage: DC 5V
Power Consumption:
30 LED / Meter- 9 watt/meter
60 LED / Meter- 18 watt/meter
LED Resource: WS2813 LED (5050 SMD RGB LED with built-in improved version of WS2811 ic)
LED Chip: Epistar
LED: each LED is separately controlled
of IC: (1 IC drives 1 led chip)
Pixels: 30 – 60 /meter
Grey Scale: 256
Bits/Color: 8-bits/color
FPC Size: Width: 10mm, High: 2.5mm
FPC Color: White or Black
Protection Rate: IP30 IP67
Colors: Full color RGB, dream color changing
(Black: 5V Power , Green: Date Line, Red: Standby Date Line,Blue: GND)
Recommended controllers:
T-1000s,T-4000s, T-800s, T-100K;T-200K;T-300K
What you will receive:
1 x LED Strip as per your selection
| LED Qty | |
|---|---|
| Length | |
| Colour | |
| Waterproof |
Related products
£7.99 – £42.99
£6.39 – £137.99
£4.89 – £51.23
Out of stock
£4.49 – £32.99
£9.99 – £10.99
£16.99 – £72.99
£9.99 – £10.99