Skip to content
      • About
      • Contact
      • Login / Register
        Makers HutMakers Hut
        • Basket / £0.00 0
          • No products in the basket.

        • Checkout +
        • 0

          Basket

          No products in the basket.

        Home / LED Lighting / Controllers

        T1000S SD Card RGB LED Pixel Controller -WS2812 WS2812B LPD8806 WS2811 WS2801 T1000S

        £28.99

        14 in stock

        T1000S SD Card RGB LED Pixel Controller -WS2812 WS2812B LPD8806 WS2811 WS2801 T1000S

        £28.99

        SKU: LED-CON-001-1 Category: Controllers Tags: controller, led, LPD8806, Pixel Controller, SD Card, T1000S, WS2801, ws2811, WS2812
        Product Categories
        • 3D Printer
          • Controllers
          • Filament
          • Kits
          • Parts & Accessories
        • Arduino
          • Boards
          • Kits
          • Shields and Accessories
        • Cooling
          • Fan Guards
          • Fans
          • Heatsinks
        • Drone
        • Drones and More
          • Accessories
          • Antennas
          • Components
          • Drones
          • Kits
        • Electronics
          • Access Control
          • Cable
          • Components and Sensors
          • DIY Kits
        • LED Lighting
          • Accessories
          • Beads
          • Bulbs
          • Controllers
          • DMX
          • Downlights
          • Panel
          • Strips
        • Mechanical
          • Bearing
          • Bearings
            • Ball
            • Bushings
            • Flange
            • Grooved
            • Linear
            • Miniature
            • Needle
            • Self Aligning
            • Self Lube
            • Taper Roller
          • Fluid Transfer
          • Magnets
          • Mounts and Supports
          • Pulleys and Coupler
          • Rails and Carriage
          • Rods
          • Rods and Carriages
          • Timing Belt
        • Microcontrollers
        • Miscellaneous
        • Motors
          • Accessories
          • Coreless
          • DC Motors
          • Drivers
          • Spindle
          • Step
        • Other
        • Power Supply
        • Raspberry Pi
          • Boards and Kits
          • Shields and Accessories
        • Robotics
          • Components
          • Kits
        • Uncategorised
        • Virtual Reality
        • Description
        • Additional information

        Description:

        T1000-S RGB Pixel controller is an advanced controller that enables you to create stunning LED light displays,
        shop signs, LED matrixes and screens and many more applications. It supports advanced pixel layouts all configurable from the software provided (LedEdit 2013). Each controller supports up to a maximum of 2048 pixels. More than one controller can be chained together to enable larger displays. All programs are stored on the SD card provided (16 programms MAX) and can be cycled through with a push of a button on the controller. The speed of each program can also be adjusted with buttons on the controller.

        T-1000S has a built in support for single line and dual line LED ICs. If controlling up to 512 pixels speeds can reach 30fps.
        If more than 512 pixels are attached fps will decrease automatically.

        Specification:

        Input voltage: 5-24V
        Dimensions: 6.30 in x 2.95 in x 0.91 in (16.0 cm x 7.5 cm x 2.3 cm)
        Weight: 8.11 oz (230 g)
        Number of programs: 16 MAX
        MAX number of pixels: 2048
        SD card format: FAT
        Supported chips:
        LPD6803, D705, 1101, 6909, 6912, LPD8806, LPD8809, TM1803, TM1804, TM1809,
        TM1812, M1903, TM1904, TM1909, TM1912, UCS6909, UCS6912, UCS7009, UCS5903,
        UCS1903, UCS1909, UCS1912, UCS3903, WS2801, WS2803, WS2811, WS2812, WS2812B, DS189, TLS3001, DMX512 (170/512pixels),
        TLS3002, TLS3008, P9813, SM16715, SM16716, BS0901, BS0902, BS0815

        Note: For the TTL(SPI) signal, the controller ground must be connected to the LED ground directly.

        What you will receive:

        • T-1000S RGB LED Pixel controller
        • 256MB SD Card

        Please contact us if you need the lededit 2013 programme.

        Weight200 g

        Related products

        Quick View
        Out of stock

        Controllers

        Milight LS2 – 5 in 1 LED strip controller, 2.4GHz Remote and Smartphone Control

        £13.99
        Placeholder
        Quick View
        Out of stock

        Strips

        5M UV 3528 SMD Purple 600 LED Strip Non Waterproof Ultra Violet

        £29.99
        Quick View
        Out of stock

        Controllers

        T-8000S RGB LED Pixel Controller SD Card -WS2812 LPD8806 WS2811 WS2801 T8000S

        £144.99
        Quick View

        Controllers

        T-4000AC RGB LED Pixel Controller SD Card WS2812 LPD8806 WS2811 WS2801 T4000S

        £99.99
        Quick View

        Controllers

        3 Channel 12V/24V Intelligent Light Sensor And Time Programmable Led Controller

        £24.99
        HC202S RGB LED Pixel Controller SD Card -WS2812 LPD8806 WS2811 WS2801
        Quick View
        Out of stock

        Controllers

        HC202S RGB LED Pixel Controller SD Card -WS2812 LPD8806 WS2811 WS2801

        £36.49
        Quick View

        Strips

        WS2811 5050 RGB Full Color Addressable Strip- 30 – 48 – 60 LED/M – IP30 IP67 12V

        £4.49 – £32.99
        Quick View

        Power Supply

        5V 12V 24V 48V AC to DC Power Adapter Transformer 30W-240W – CHARGER LED CCTV

        £4.99 – £17.99
        • About
        • Contact
        Copyright 2020 © Makers Hut
        • 3D Printer
        • Arduino
        • Cooling
        • Drones and More
        • Electronics
        • LED Lighting
        • Mechanical
        • Microcontrollers
        • Miscellaneous
        • Motors
        • Power Supply
        • Raspberry Pi
        • Robotics
        • Virtual Reality
        • Contact
        • Buy now