LED Remote Controller Milight FUT006 Brightness Adjustable 2.4G RF 4 Zones

• Dimming and brightening of connected LED lighting
• Control each zone separately
• All zones can be turned on / off at the same time
• Two operating modes – mono and CCT (change in colour temperature)
• Immediate brightness reduction (night mode)

• Four zones to use
• Battery powered (2×1,5V AAA)
• Radio communication with receivers (2.4GHz)
• Cooperation with a Wi-Fi controller (additional option)
• The possibility of expanding the installation at any time

The basic communication with the receiver takes place by means of a radio route. Obtaining an optional control by connecting to a Wi-Fi network, which allows control of lighting with the help of mobile devices (eg smartphone or tablet), is available only after using the appropriate Wi-Fi module. Available cooperating devices can be found in the table below or in the category “related products”.

Table 1. Cooperating devices with LED remote control – Mi-Light – FUT006

Full control – cooperation with receiving devices

Each of the transmitting devices of the Mi-light LED driver series is characterized by the ability to assign not only one device to it. Built-in invisible under the housing electronics works on the principle of a receiving device thus connecting to our LED driver. One zone in the remote control is also not an obstacle because we can assign to it many devices such as LED bulbs, downlights or receivers cooperating with the given model. Many devices do not interfere with each other and make this connection easy to use and easy to control. Below you will find a full table showing all the devices that work with the given model.

Construction of the remote control – the control was not so easy

The whole room at your fingertips – zone control