Universal Joint Coupling Steering Connector – 4×4 5×5 6×6 8×8 10×10 mm

Description:

Iron plated universal joints can be bent at any angle (rotation angle of 45 degrees). The universal joint can change the direction of the drive at any angle. Originally, a motor shaft is facing south and connected by a universal joint, and the direction of the rotating shaft can be changed to face the ground. Can isolate or absorb axial vibration and impact, large torque, small transmission inertia, large adjustment angle, easy installation, wide application range, long service life and other significant advantages, applicable to all kinds of general machinery occasions.

Universal joint description:

4-4 indicates that one side of the hole is 4mm in diameter, and the other end of the hole is 4mm in diameter; (M3 screws are used for the side hole) Outer Diameter is 9mm
5-5 indicates that one side of the hole is 5mm in diameter, and the other end is 5mm in diameter; (M4 screws are used for the side hole) Outer Diameter is 11mm
6-6 indicates that one side of the hole is 6mm in diameter, and the other end is 6mm in diameter; (M4 screws are used for the side holes)
8-8 indicates that one side of the hole is 8mm in diameter, and the other end of the hole is 8mm in diameter; (M4 screws are used for the side hole) Outer Diameter is 14mm
10-10 indicates that one side of the hole has an aperture of 10mm, and the other end has an aperture of 10mm; (M4 screws are used for the side holes) Outer Diameter is 15.75mm

What you will receive:

1 x Universal Joint Coupling Steering Connector