Super Volcano HotEnd Titanium Alloy/Brass

Description:

It is produced with TC4 titanium alloy material. The composition of TC4 titanium alloy material is Ti-6Al-4V, which belongs to the (a+b) type titanium alloy. It has good comprehensive mechanical properties and high specific strength. The strength of TC4 sb=1,012MPa, density g=4.4×103, specific strength sb/g=23.5, while the specific strength sb/g of alloy steel is less than 18. Titanium alloy has low thermal conductivity. The thermal conductivity of titanium alloy is 1/5 of steel, 1/13 of aluminum alloy, 1/25 of copper, and the thermal conductivity of TC4 is l=7.955W/m·K. The above data is for reference only.

High temperature resistance thermistor:

Model: HT-NTC100K thermistor temperature sensor element
Weight: 1 meter cable length 8g, 2 meter cable length 16g
Product Specifications: Negative temperature coefficient (NTC) thermistor Model: B3950
Store Suggestion: Thermistor temperature measurement stability, After the new HT-NTC100K is upgraded, the temperature measurement can reach 320 degrees for a long time, which can effectively replace the K-type thermocouple and solve the problem of strict wiring requirements for the K-type thermocouple, and the long line is easily affected by external interference, resulting in excessive temperature fluctuations. Affect print quality.
Tips: It is recommended that the temperature not exceed 320 degrees, otherwise the wires and packages above will not be able to withstand such a high temperature for a long time.

Compared with the improvement of temperature measuring resistors on the market:
1. The original ordinary temperature measuring head is directly exposed for temperature measurement, and upgraded to resistance package temperature measurement. The cylinder outer diameter of the temperature measuring head is 3mm and the length is 15mm. It can be matched with a heating block that supports thermocouples. use.

2. Increase the temperature measurement range from -50°C to +250°C to -50°C to +330°C to help print high-temperature materials and replace the original K-type electric couple temperature measurement (electrical couple temperature measurement is not recommended, K-type electric Strict requirements for the connection of the pair, the need for grounding of the shell, the excessively long connecting wire, which is easily affected by external interference, and cause excessive temperature fluctuations, which affect the print quality. If you need to print high-temperature materials, the store recommends using the new high-temperature HT-NTC100K thermistor test. temperature).

3. The new version of HT-NTC100K temperature measuring resistors are all made with imported methods, using 304 stainless steel material, with an internal temperature measuring package, to ensure that they are made of real materials to achieve maximum service life and accurate temperature measurement.

4. The new version of HT-NTC100K temperature measuring resistor adopts white high temperature resistant cord, which is more resistant to high temperature. For the convenience of customers, it adopts parallel connection. Customers can tear and use according to their own needs. The high temperature wire is twice as thick as the market. , It is not easy to break when used.

5. Support customization of temperature measuring resistors of different specifications, cylinder size and length of the temperature measuring head (minimum order of 100).

6. It can be used with the new version of the heating tube (the new heating tube can heat up to about 330 degrees).

High temperature heating rod

Compared with the improvement of the ordinary red heating tube:
1. The original ordinary high temperature wire is changed to the white color high temperature wire, which is more resistant to high temperature and more beautiful.
2. From the original ordinary 40W power to 50W, the original ordinary heating maximum temperature is about 280-300 increased to the current maximum temperature of about 300-340 (the heating tube is recommended to be heated for a long time not to exceed 320 degrees).
3. The new version of the heating tube is made of imported methods, using 304 stainless steel material, with the use of internal 2080 nickel chromium wire, the best external tube to ensure the real material to achieve the maximum service life.
4. Using imported heating wire, the use time can be increased by 2-3 times compared with the original heating tube, and it is more assured to use.
5. Support custom heating tubes with different specifications, lengths and resistances.
6. It can be used with the new version HT-NTC100K temperature measuring thermistor (resistance temperature measurement can reach 350 degrees).
Specification: 12V 24V optional, cable length 1 meter

Specification:

Dimensions: 11.5 x 21.5 x 50mm

What you will receive:

1 x Super Volcano HotEnd