The Xtreme V Wheel is part of the heavy duty Xtreme line of parts, designed with strength in mind.
The Xtreme V Wheel Kit is part of the heavy duty Xtreme line of parts, designed with strength in mind.
These Xtreme V Wheels are made from very hard polycarbonate (clear) material which, due to it’s strong nature, will resist compression and wear, and in turn, lead to better over all precision and strength for your builds.
The Xtreme V wheels are designed to be used as a heavy duty alternative to the Delrin V Wheels in applications such as CNC Routers/Mills where force and weight are introduced into the system. So, while the Delrin V Wheels work great for most light load applications, the Xtreme V wheels can be used for builds where heavier loads are required and less compression than the delrin is desired.
These wheels have been tested at 25 lbs. per wheel with no noticeable deflection.
Many of these wheels could be added to a gantry to allow an even distribution of the load across them.
Each wheel is carefully milled for consistent high precision and tolerance.
- 1 x Xtreme V Wheel
- 2 x Ball Bearings – 625 2RS
- 2 x 5mm Precision Shim
- 1 x Lock Nut with Nylon Insert
or wheel only.
- Material – Polycarbonate (clear)
- Dimensions 24.39 OD x 15.974 +/- 0.026 ID x 10.23 ‘thick’
- Rockwell Hardness M 75
- Compressive Strength 86Mpa