Description:
HK Drawn Cup Type Needle Roller Bearings: As the name suggests are needle roller bearings with a deep drawn thin-walled outer ring with open ends. They are characterised by low sectional height and high load carrying ability. They are ideal where a very compact and economical bearing arrangement is required. The RS and 2RS series are fitted with one or two nitrile rubber seals dependent on the suffix.
Benefits: Compact low cross section design, high load bearing, low cost and economical, available in sealed and unsealed options. Requires only a bored housing for deployment, the simplest of housing designs.
Specification:
Fw = 20
D = 26
C = 16
Dynamic Load N = 12300
Static Load N = 20400
Fatigue Load Limit Pu = 2360
Speed in Grease rpm = 9000
Speed in Oil rpm = 14000
C1 = –
r1r2 min = 0.8
Da max = 20.8
ra max = 0.8
Inner Ring = IR17x20x16.5
Seal = G/SD20x26x4
Weight g = 19
What you will receive:
2 x Bearings